100 FT ROLL 1/2 BLUE SLEEVED P

The “100 FT ROLL 1/2 BLUE SLEEVED P” is a:

🔵 1/2" Blue Sleeved PEX Tubing – 100 ft Roll

It’s a half-inch flexible PEX water line with a blue protective sleeve, used in plumbing and hydronic systems.

⚙️ Breaking down the description

• 100 FT ROLL → 100-foot coil
• 1/2 → 1/2-inch nominal tubing size
• BLUE SLEEVED → blue outer jacket (typically indicates cold water or line identification)
• P → usually a supplier/manufacturer code (often shorthand for “PEX” or packaging designation)

🔧 What it does

This tubing is used for:

• Cold water supply lines (blue = cold in most plumbing systems)
• Fixture branch lines (sinks, toilets, appliances)
• Main or secondary distribution lines in residential plumbing
• Protected runs through walls, studs, or slabs

The sleeve helps:

• Protect tubing from abrasion or damage
• Identify the line as cold water
• Provide separation or light conduit protection in concealed spaces

🏠 Where it’s used

• Residential plumbing systems
• Commercial water distribution
• Rough-in plumbing for fixtures
• Mechanical room piping
• Wall and floor penetrations (when sleeve is used for protection)

🧰 Key features

• Flexible and easy to route
• Corrosion- and scale-resistant
• Freeze-resistant compared to rigid pipe
• Compatible with standard 1/2" PEX fittings:
  • crimp rings
  • cinch clamps
  • expansion fittings (PEX-A systems, if applicable)

🧠 Simple explanation

It’s basically a 1/2-inch flexible cold-water plastic pipe wrapped in a blue protective sleeve so plumbers can easily identify it and protect it during installation.

⚠️ Important note

• “Sleeved” can mean:
  • color-coded identification jacket
  • protective conduit sleeve
  • or light insulation depending on brand
• Always verify:
  • PEX type (A, B, or C)
  • pressure/temperature rating
  • compatible fitting system