100 FT ROLL 1/2 RED SLEEVED PE

🔴 1/2" Red Sleeved Polyethylene (PE) Tubing – 100 ft Roll

It’s a small-diameter flexible water tubing roll with a red protective sleeve/jacket, used mainly in plumbing or hydronic distribution systems.

⚙️ Breaking down the description

• 100 FT ROLL → 100-foot coil
• 1/2 → 1/2-inch nominal tubing size
• RED SLEEVED → red outer protective sleeve (color-coded and/or insulated jacket)
• PE → polyethylene tubing (flexible plastic pipe, similar category to PEX depending on listing)

🔧 What it does

This tubing is used for:

• Hot water distribution lines (red = hot)
• Hydronic heating loops (radiant systems)
• Branch plumbing runs to fixtures
• Protected tubing runs through walls or slabs

The sleeve helps:

• Protect tubing from abrasion
• Provide color identification
• Sometimes add light insulation or conduit protection

🏠 Where it’s used

• Residential plumbing systems
• Radiant floor heating systems
• Mechanical room piping
• Retrofit plumbing installations
• Concealed wall or slab runs (depending on sleeve type)

🧰 Key features

• Flexible polyethylene tubing
• Lightweight and corrosion-resistant
• Freeze-resistant compared to rigid pipe
• Color-coded (red = hot water line)
• Sleeve may provide:
  • physical protection
  • insulation
  • or code-required separation

🧠 Simple explanation

It’s basically a flexible 1/2-inch plastic hot-water pipe that comes inside a red protective jacket so it’s easier to identify and less likely to get damaged during installation.

⚠️ Important note

• “PE” (polyethylene) vs “PEX” matters:
  • PEX = cross-linked (higher temp/pressure rated)
  • PE = standard polyethylene (lower temp/pressure limits depending on type)
• Always confirm:
  • temperature rating
  • pressure rating
  • approved fittings (barb, clamp, compression, etc.)